Failure audit messages.

4/6/2010 6:30:51 AM

Roel Haker

Total Posts 1

View Posts

Recently I've been getting the following messages in the eventlog:

The eventid nr is 1

Additionally synchonization isn't completing all of the 162 associations.

Probably one of the accounts involved has a problem, but the eventlog error is a bit unhelpful with that.
Deleting and reconfiguring 162 associations would be a bit of a pain.

4/7/2010 10:47:44 AM

TommyGreene

Total Posts 9

View Posts

DidItBetter Software Tech Support Team

Re: Failure audit messages.

Hi Roel!

If you are receiving failure audits it mean that you have full logging enabled. These log entries are normal during the full logging process and do not generally indicate that your relationships are not replicating. However, if you are indeed observing discrepancies in your items, please open the console and look under the server drop down for the service utility. Reduce the logging to start and stop, then run a sync. Please let me know if you receive any errors after this replication.

Thanks!

Mark Keel - Senior Technical Engineer

5/13/2010 11:06:25 AM

TervoCharged

Total Posts 158

View Posts

Re: Failure audit messages.

these messages:

The eventid nr is 1
are normal when full logging is on. Has this issue been resolved?

Site Search